Saturday, September 8, 2012

The History of Thatch

Overly since Stone Age people moved out of their sunny and dry caves to conscious a more nomadic lifestyle they had a demand for a more passing fundamentally hardy place to breathing. This led to the occasion of uncontrolled evolvement to contrive brief thatch housing made out of bracken, heather and uncultivated grasses.

The cardinal strong-minded thatch towns

As communities around the world became more unflinching and they began to burst forth more and more cereal crops such as rye, oats and wheat they started to use the by - product of each years harvest to build roofing for their dwellings. This in fact became the standard method of roofing in Western Europe, Eastern Europe and the British Isles for centuries, especially in the more rural areas.

From hero to zero

In many areas of Europe, but especially in places such as northern and western England slate became more readily available during the early 1800s and replaced thatch as the roofing raw material of choice for the majority of city and large town dwellings. The popularity of slate over thatch tiling was assured when during the Victorian age slate was transported easily by rail and used for almost all of the great building projects ( of which there were many ) of the time.

Thatch roofing at this time was viewed by people as a " poor mans roofing " and during the Victorian era not only were all new houses and buildings built using slate, but even existing thatch structures had their roofs converted into slate tile roofs.

This trend of converting thatch roofs into slate was accelerated during the late 1930s by the invention of the combined harvester in the USA. These machines chopped up the wheat and cereal crops and rendered them useless as a thatching raw material. After the Second World War British farmer adopted this automated farming method in their droves, further hastening the downfall of the use of thatch as a roofing material. In fact, during the early 1960s it was almost impossible to find thatch in many parts of the UK and Western Europe.

As recently as the late 1960s thatched cottages in the centre of Stratford upon Avon in the UK had their roofs replaced with tiles in the last great ' modernisation ' rush experienced in the UK. This surge of modernization ended in the early 1970 ' s as local authority conservation departments reversed their historical modernization policy and encouraged the re - thatching of historical buildings where appropriate.

The History Of The Chair

From each of the furniture needs, the chair may be the most imperative. Duration the majority of other forms ( save for the foothold ) are designed to prop objects, the chair supports your human arrangement. The term chair commitment be viewed here in the widest sense, from declare to realm to further items including the magister and sofa, which may be regarded as extended or connected chairs, and whose sense ( i. e., whether they are intended for sitting or reclining ) is not distinctly labeled.

The social history of the chair is as curious as its history as a fertile craft. The chair is not tidily a essential rest and / or an pleasing piece of art; it can also be an thorn of social rating. From the historical royal courts qualified were social signifiers between being seated on a chair with arms, on a chair with a back but invisible arms, or having to treatment a make public. Since the recent century, a director ' s and manager ' s chair has been regarded as iconic of superior dignity, and in democratic power debate the speaker sits on a high - set platform.

As its furniture contour, the chair holds a treasure of different models. Proficient are chairs created to roll in to man ' s age and sincere abilities ( the sky-scraping chair, the wheelchair ) and to denote his level in society ( the executive chair, the kingdom ). Since historical times well-qualified were chairs used for birthing ( birth chairs ); from the 20th century, well-qualified have been chairs used for ending life ( the electric chair ). We have chairs with one, two, three, or four legs, chairs with or kiss goodbye arms, and chairs with or irrecoverable backs. We have chairs that can be folded, chairs on wheels, and chairs on runners.

Our lifestyle has characteristic separate chairs for automobiles and aircraft. Every one of these chair shapes has been perfected to conform to increasing human desires. Because of its close link with man, the chair lives to its full significance only when being utilised. Though it doesn ' t make a contrariety to one ' s appreciation of a cupboard or a dresser knickers whether efficient might be items inside or not, a chair is utterly pragmatic best and tested by a person utilising it, for chair and sitter duty one other. Consequently the several areas of a chair were named identical the names of a human shape: arms, legs, feet, back, and seat.

Because the clear purpose of a chair is to timber our human body, its market price is judged at last by how whole it does measure up to this practical work. Within the design of a chair, the carpenter is limited with some static regulation and principal measurements. In these limits, however, the chair holiness has marvellous latitude.

The history of the chair extends over an era of several thousand second childhood. Practiced were societies that made lone chair forms, as empirical of the principal phenomenon in the industries of profit and design. In those societies, a mention should be made of ancient Egypt and Greece; China; Spain and The Netherlands in the 17th century; England in the 18th century; and France in the 18th century during the ascendancy of Louis XV and Louis XVI.

Egypt Two ancient Egyptian chair forms, both the structures of skilled scheme, are now a adjudicature from discoveries made in tombs. One of these two is a four - legged chair with a back, the other a folding give away. The typical Egyptian chair would have had four legs shaped akin to those of an ill-favored, a bowed seat, and leading to a sloping back supported with vertical stretchers. In this design a solid triangular design was obtained. Expert seemed to be no noteworthy differentiation between the creation of Egyptian thrones and chairs for ordinary peasantry. The royal variation lied in the intricacy of its decoration, in the choice of pricier inlays. The Egyptian folding broadcast most casual was manufactured as an easily stored seat for officers. As a campy confess this type persisted during much subsequent times. But the inform then was created for the purpose of a ceremonial seat, its technical job as a folding stool neglected or forgotten. This can already be found, from as early as 1366 - 57 BC in two stools, crafted in ebony with ivory inlay ornamentation and gold mounts, from the tomb of Tutankhamen. They are made in the construction of folding stools but can not be folded because the seats were created of wood. The simplistic build of the folding stool, being of two frames that turn on metal bolts and support a seat of leather or fabric secured between them, can be seen some time later in the Bronze Age folding chairs of Scandinavia and northern Germany. The most recognisable of those is the folding stool, made from ashwood, which can now be seen at Guldhj ( National Museum in Copenhagen ).

Greece and Rome The iconic Greek chair, the klismos, is known not as any ancient fossil still extant but in a trove of pictorial evidence. The better recognised is the klismos posited on the Hegeso Stele at the Dipylon burial location near Athens ( c. 410 BC ). This is a chair with a backward - sloping, curved backboard and four curving legs, but only two of these legs would be shown. These strange legs were presumably executed out of bent wood and were in that case put under a large amount of pressure from the weight of the sitter. The joints attaching the legs to the frame of the seat had to be therefore very durable and were visibly denoted.

The Romans embued the Greek designs; some statues of seated Romans offer designs of a heavier and in appearance slightly crudely designed klismos. Both types, the light and heavy, were popularised within the Classicist era. The klismos chair is evidenced in French Empire design, in English Regency, and in some kinds of considerable iconicism within Denmark and Sweden circa 1800.

China The past of the chair in China is not able to be tracked as long as that of Egypt and Greece. From the time of the Tang dynasty ( AD 618 - 907 ) an unscathed folio of sketches and artworks had been kept safe, with images of the interiors and exterior of Chinese households and their furniture. Preserved also of the 16th century are a collection of chairs of wood or lacquered wood, that hold an astonishing resemblance to representations of previous chairs.

Just as in Egypt, there were two major chair forms in China: a chair having four legs and a folding stool. This four - legged chair was seen both with or without arms though always with its square seat and straight stiles ( standing side supports ) to firm the back. In one form, it has been seen, the stiles had been marginally curved above the arms for the purpose of suit the angle of the S - shaped back splat ( the basic upright of the chairback ). Each of the three areas are mortised on the yoke - like top rail. Despite that the design of the Chinese back splat had a foundation for English chairs of the Queen Anne period, wooden sections that merely to a restricted limit embolden corner joints ( and furthermore are loose in the bargain ) represent an element particular to Chinese chairs. The four legs sit through the seat frame, which closes around the rounded staves. Every member is round in section or possesses rounded edges - referable as may be to the bamboo tradition. The seat is not comfortable and may have a plaited texture. These chairs needed the sitter to remain stiff and upright; when too much weight is pushed on the back, the chair has a tendency to topple. In patriarchal Chinese households of this era armchairs most likely were reserved only for senior persons, for they were given great esteem.

The Chinese folding stool is believed to have come to China from the West. It is not dissimilar much from the Egyptian or Scandinavian folding stools, but it possesses a difference in that the top rail is prettily joined to the two legs of the stool with a curved member, which is often provided with metal mounts. From a Western point of view the overall effect of both these furniture forms is stylized. The constructive and decorative parts are combined in a way that is both nave and refined. The patched up appearance is an upshot of the way that the individual parts do not appear to have been fixed together with either glue or screws, but are mortised onto one another and held in place in the style of a Chinese puzzle.

Spain: 17th century The Golden Age of Spain of the 17th century also left its signature on the chair. Paintings project a kind of chair with a relatively brusque wooden frame; a back and seat, nailed on, possessing two layers of leather, with horsehair stuffing in between the layers, stitched to bring out a pattern of small pads. The front board and a corresponding board from the back could be folded after unscrewing some little iron hooks. Thus the chair was a portable piece of furniture when traveling which, during the same era, granted the dignity of a four - legged, high - backed armchair.

The Netherlands: 17th century A low, square, upholstered style of chair is seen in engravings of the inside of wealthy Dutch homes by Abraham Bosse, a French artist, as well as in paintings by the Dutch artists Johannes Vermeer and Gerard Terborch. While this type of chair is also found in countries where Dutch styles of interior decoration and Dutch furniture won acclaim, it is not determined that the form actually originated in The Netherlands. Usually, the legs of the chair will be smooth, round in section, and of thin measurements; they are sometimes baluster - shaped ( vase - shaped ) or twisted. It is obviously a bourgeois piece of furniture and was made in considerable amounts, as can be seen from one of Abraham Bosse ' s engravings, in which an entire row of such chairs lined up by a wall. The design asserts itself with its elegant proportions and delicate upholstery in gilt leather or fabric framed with fringes.

France and England: 17th and 18th centuries The French Rococo chair in its most mature form - that was, to say, as developed in Paris around 1750 - spread through most of Europe and was imitated or copied during the mid - 20th century. The model owes the popularity to a combination of relaxation and elegance. The seat adheres to the human body and permits a relaxed sitting position. The back is bow - shaped, the legs curved. Generally the seat and back are upholstered, and there are small upholstered pads over the armrests. Smooth transitions are made between seat frame, legs, and back conceal all the joints, which are constructed on craftsmanlike methodology despite the absence of stretchers between the legs.

French Rococo chairs and imitations of those are constructed from wood of relatively thick dimensions; but all the members are deeply molded, all extra wood has been taken away, and more upmarket chairs can be further embellished with special delicate and decorative engraving. The wood can be varnished, stained, painted, or gilded. Silk damask or tapestry may be used for all the upholstery on the seat, back, and armrests; cane is occasionally used as an alternative to upholstery.

English chairs of the 18th century were more differentiated in form than the French. The French taste for stylistic uniformity, which lead from the highest circles in Paris and Versailles within most of France and became the favourite in several parts of the Continent, had no parallel in England. Prior to 1740, the most commonly used wood was walnut; thereafter, and for the rest of the century, it was mahogany. Walnut, though beautiful in hue, was soft and therefore less suited to wood carving than to rounded, curving forms. Outer surfaces, such as the back and seat frame, were usually veneered. During the walnut period, highly overstuffed armchairs, covered with leather or embroidered material, were also developed. The best upholstery of this period is precisely and firmly modelled and accentuated by braiding or tacks. When imports of mahogany became common, no specifically new chair designs appeared, but the character of the woodwork changed. Mahogany, having a firmer, closer grain, could be cut thinner, which meant that individual parts of the chair could be more slender in shape. Mahogany also lent itself better to carving than walnut. Carving was concentrated more on the arms and back than on the legs, which as a rule were straight and smooth with chamfered ( bevelled ) edges and molding. There was a wealth of variety in chairback designs, featuring elegant, pierced, vase - shaped splats or two upright posts connected by horizontal slats ( ladderback ).

Alongside the French Rococo chair and the best English chairs in walnut and mahogany, the stick - back chair was relatively unaffected by the stylistic changes of the day. Originally a medieval form, known, for example, from paintings by Pieter Bruegel the Elder and still found in mid - 20th century in the churches and inns of southern Europe, the stick - back chair ( in all of its variations ) consists basically of a solid, saddle - shaped seat into which the legs, back staves, and possibly the armrests are directly mortised. This typically peasant form underwent a renewal and a process of refinement in England and America during the 18th century. Under the name Windsor chair ( a term that seems to have been used for the first time in 1731 ) or Philadelphia chair, it became reknowned and was widely distributed throughout the world.

Late 18th to 20th century In the Neoclassical period, no basic changes took place in chair forms, but legs became straight and dimensions lighter. Backs in the shape of classical vases replaced the fanciful outlines of the Rococo period. Around 1800, freely executed imitations of Greek and Roman chairs of the klismos type, with curved legs and backrest, appeared. French chairs of the Empire period, executed in dark mahogany and embellished with ornate bronze mounts, created a ponderous effect.

In cheaper brands of inferior workmanship, bourgeois chairs of the 19th century carried on the traditions of the 17th and 18th centuries. The only real innovations were the bentwood ( wood that has been bent and shaped ) chairs in beech that became popular all over the world and were still made in the 20th century. Around 1900 the continental Art Nouveau and Jugendstil styles ( French and German styles characterized by organic foliate forms, sinuous lines, and non - geometric forms ), and the Arts and Crafts movement in England ( established by the English poet and decorator William Morris to reintroduce idealized standards of medieval craftsmanship ), gave rise to original chair designs by Eugne Gaillard in France, Henry van de Velde in Belgium, Josef Hoffman in Austria, Antonio Gaud in Spain, and Charles Rennie Mackintosh in Scotland. These new furniture styles did not exercise wide, let alone decisive, influence. The Art Nouveau chairs designed by the French architect Hector Guimard, for example, are collector ' s pieces, but his name is known to a broader public only because of his fanciful entrances to the Paris Mtro.

Modern After World War I, the Bauhaus school in Germany became a creative centre for revolutionary thinking, resulting, for example, in tubular steel chairs designed by the architects Marcel Breuer, Ludwig Mies van der Rohe, and others. During World War II, the aircraft industry accelerated the development of laminated wood and molded plastic furniture. The dominant chair forms of this period go back to designs by Alvar Aalto, Bruno Mathsson, and Charles and Ray Eames. Rapid technical developments, in conjunction with an ever - increasing interest in human - factors engineering, or ergonomics, hint that completely new chair forms will probably be evolved in the future.

The History Of The Alice Military Backpack

The ALICE military backpack, or all - purpose lightweight specific carrying equipment, is a military backpack that was developed in 1973. The pack was a necessity for garrison engaged in the Vietnam war. The ALICE backpack was the main pack in use by the United States Military throughout the 1970 ' s and 1980 ' s. Currently these backpacks are now longer in end and are being replaced by the MOLLE backpack.

The ALICE pack was designed to remove some of the weight that a gi had to manage with older backpack systems. The development of this pack moneyless the weight of the pack to 3 lbs. This higher a soldiers portability and made long patrols more comfortable for each man-at-arms. The backpack tidily used different and lighter material than the past packs which made it successful. The backpacks that were used in WW I and WWII were made of heavy cotton and steel. While not incredibly heavy at 5 lbs. the backpack would often retain water when wet and make it cumbersome for most military personnel. The cotton in past packs was changed to water proof, light weight nylon and the steel components were switched to aluminum. These changes allowed the pack to be lightweight and less of a problem for soldiers.

The design of the backpack, with two wide shoulder straps and a mid section strap, was to take strain on a soldiers shoulders and back. This allowed soldiers to march and patrol more comfortably. The size of the pack allowed soldiers maximum carrying capability and allowed each soldier to carry a change of clothes, firearms and ammunition and a field first aid kit. The pack also allowed soldiers to pack more specific equipment given the soldiers objectives and missions. The rucksack came in three sizes to suit the soldiers needs.

Although the ALICE back was supposed to be replaced in 1988, the popularity of the pack in the military has made this transition slow. The pack and components are easily interchangeable with the newer packs.

The ALICE pack is not only the favorite pack to soldier, but to campers and hikers as well. They are easily found in army surplus stores and are available at reasonable prices. The strap system and the lightweight components make this pack a favorite for a wide variety of adventurers. Although new packs are slowly taking the ALICE backpack ' s place in the military it will be a long time before this backpack is no longer available.

The History Of The Chair

From each of the furniture needs, the chair may be the most imperative. Duration the majority of other forms ( save for the foothold ) are designed to prop objects, the chair supports your human arrangement. The term chair commitment be viewed here in the widest sense, from declare to realm to further items including the magister and sofa, which may be regarded as extended or connected chairs, and whose sense ( i. e., whether they are intended for sitting or reclining ) is not distinctly labeled.

The social history of the chair is as curious as its history as a fertile craft. The chair is not tidily a essential rest and / or an pleasing piece of art; it can also be an thorn of social rating. From the historical royal courts qualified were social signifiers between being seated on a chair with arms, on a chair with a back but invisible arms, or having to treatment a make public. Since the recent century, a director ' s and manager ' s chair has been regarded as iconic of superior dignity, and in democratic power debate the speaker sits on a high - set platform.

As its furniture contour, the chair holds a treasure of different models. Proficient are chairs created to roll in to man ' s age and sincere abilities ( the sky-scraping chair, the wheelchair ) and to denote his level in society ( the executive chair, the kingdom ). Since historical times well-qualified were chairs used for birthing ( birth chairs ); from the 20th century, well-qualified have been chairs used for ending life ( the electric chair ). We have chairs with one, two, three, or four legs, chairs with or kiss goodbye arms, and chairs with or irrecoverable backs. We have chairs that can be folded, chairs on wheels, and chairs on runners.

Our lifestyle has characteristic separate chairs for automobiles and aircraft. Every one of these chair shapes has been perfected to conform to increasing human desires. Because of its close link with man, the chair lives to its full significance only when being utilised. Though it doesn ' t make a contrariety to one ' s appreciation of a cupboard or a dresser knickers whether efficient might be items inside or not, a chair is utterly pragmatic best and tested by a person utilising it, for chair and sitter duty one other. Consequently the several areas of a chair were named identical the names of a human shape: arms, legs, feet, back, and seat.

Because the clear purpose of a chair is to timber our human body, its market price is judged at last by how whole it does measure up to this practical work. Within the design of a chair, the carpenter is limited with some static regulation and principal measurements. In these limits, however, the chair holiness has marvellous latitude.

The history of the chair extends over an era of several thousand second childhood. Practiced were societies that made lone chair forms, as empirical of the principal phenomenon in the industries of profit and design. In those societies, a mention should be made of ancient Egypt and Greece; China; Spain and The Netherlands in the 17th century; England in the 18th century; and France in the 18th century during the ascendancy of Louis XV and Louis XVI.

Egypt Two ancient Egyptian chair forms, both the structures of skilled scheme, are now a adjudicature from discoveries made in tombs. One of these two is a four - legged chair with a back, the other a folding give away. The typical Egyptian chair would have had four legs shaped akin to those of an ill-favored, a bowed seat, and leading to a sloping back supported with vertical stretchers. In this design a solid triangular design was obtained. Expert seemed to be no noteworthy differentiation between the creation of Egyptian thrones and chairs for ordinary peasantry. The royal variation lied in the intricacy of its decoration, in the choice of pricier inlays. The Egyptian folding broadcast most casual was manufactured as an easily stored seat for officers. As a campy confess this type persisted during much subsequent times. But the inform then was created for the purpose of a ceremonial seat, its technical job as a folding stool neglected or forgotten. This can already be found, from as early as 1366 - 57 BC in two stools, crafted in ebony with ivory inlay ornamentation and gold mounts, from the tomb of Tutankhamen. They are made in the construction of folding stools but can not be folded because the seats were created of wood. The simplistic build of the folding stool, being of two frames that turn on metal bolts and support a seat of leather or fabric secured between them, can be seen some time later in the Bronze Age folding chairs of Scandinavia and northern Germany. The most recognisable of those is the folding stool, made from ashwood, which can now be seen at Guldhj ( National Museum in Copenhagen ).

Greece and Rome The iconic Greek chair, the klismos, is known not as any ancient fossil still extant but in a trove of pictorial evidence. The better recognised is the klismos posited on the Hegeso Stele at the Dipylon burial location near Athens ( c. 410 BC ). This is a chair with a backward - sloping, curved backboard and four curving legs, but only two of these legs would be shown. These strange legs were presumably executed out of bent wood and were in that case put under a large amount of pressure from the weight of the sitter. The joints attaching the legs to the frame of the seat had to be therefore very durable and were visibly denoted.

The Romans embued the Greek designs; some statues of seated Romans offer designs of a heavier and in appearance slightly crudely designed klismos. Both types, the light and heavy, were popularised within the Classicist era. The klismos chair is evidenced in French Empire design, in English Regency, and in some kinds of considerable iconicism within Denmark and Sweden circa 1800.

China The past of the chair in China is not able to be tracked as long as that of Egypt and Greece. From the time of the Tang dynasty ( AD 618 - 907 ) an unscathed folio of sketches and artworks had been kept safe, with images of the interiors and exterior of Chinese households and their furniture. Preserved also of the 16th century are a collection of chairs of wood or lacquered wood, that hold an astonishing resemblance to representations of previous chairs.

Just as in Egypt, there were two major chair forms in China: a chair having four legs and a folding stool. This four - legged chair was seen both with or without arms though always with its square seat and straight stiles ( standing side supports ) to firm the back. In one form, it has been seen, the stiles had been marginally curved above the arms for the purpose of suit the angle of the S - shaped back splat ( the basic upright of the chairback ). Each of the three areas are mortised on the yoke - like top rail. Despite that the design of the Chinese back splat had a foundation for English chairs of the Queen Anne period, wooden sections that merely to a restricted limit embolden corner joints ( and furthermore are loose in the bargain ) represent an element particular to Chinese chairs. The four legs sit through the seat frame, which closes around the rounded staves. Every member is round in section or possesses rounded edges - referable as may be to the bamboo tradition. The seat is not comfortable and may have a plaited texture. These chairs needed the sitter to remain stiff and upright; when too much weight is pushed on the back, the chair has a tendency to topple. In patriarchal Chinese households of this era armchairs most likely were reserved only for senior persons, for they were given great esteem.

The Chinese folding stool is believed to have come to China from the West. It is not dissimilar much from the Egyptian or Scandinavian folding stools, but it possesses a difference in that the top rail is prettily joined to the two legs of the stool with a curved member, which is often provided with metal mounts. From a Western point of view the overall effect of both these furniture forms is stylized. The constructive and decorative parts are combined in a way that is both nave and refined. The patched up appearance is an upshot of the way that the individual parts do not appear to have been fixed together with either glue or screws, but are mortised onto one another and held in place in the style of a Chinese puzzle.

Spain: 17th century The Golden Age of Spain of the 17th century also left its signature on the chair. Paintings project a kind of chair with a relatively brusque wooden frame; a back and seat, nailed on, possessing two layers of leather, with horsehair stuffing in between the layers, stitched to bring out a pattern of small pads. The front board and a corresponding board from the back could be folded after unscrewing some little iron hooks. Thus the chair was a portable piece of furniture when traveling which, during the same era, granted the dignity of a four - legged, high - backed armchair.

The Netherlands: 17th century A low, square, upholstered style of chair is seen in engravings of the inside of wealthy Dutch homes by Abraham Bosse, a French artist, as well as in paintings by the Dutch artists Johannes Vermeer and Gerard Terborch. While this type of chair is also found in countries where Dutch styles of interior decoration and Dutch furniture won acclaim, it is not determined that the form actually originated in The Netherlands. Usually, the legs of the chair will be smooth, round in section, and of thin measurements; they are sometimes baluster - shaped ( vase - shaped ) or twisted. It is obviously a bourgeois piece of furniture and was made in considerable amounts, as can be seen from one of Abraham Bosse ' s engravings, in which an entire row of such chairs lined up by a wall. The design asserts itself with its elegant proportions and delicate upholstery in gilt leather or fabric framed with fringes.

France and England: 17th and 18th centuries The French Rococo chair in its most mature form - that was, to say, as developed in Paris around 1750 - spread through most of Europe and was imitated or copied during the mid - 20th century. The model owes the popularity to a combination of relaxation and elegance. The seat adheres to the human body and permits a relaxed sitting position. The back is bow - shaped, the legs curved. Generally the seat and back are upholstered, and there are small upholstered pads over the armrests. Smooth transitions are made between seat frame, legs, and back conceal all the joints, which are constructed on craftsmanlike methodology despite the absence of stretchers between the legs.

French Rococo chairs and imitations of those are constructed from wood of relatively thick dimensions; but all the members are deeply molded, all extra wood has been taken away, and more upmarket chairs can be further embellished with special delicate and decorative engraving. The wood can be varnished, stained, painted, or gilded. Silk damask or tapestry may be used for all the upholstery on the seat, back, and armrests; cane is occasionally used as an alternative to upholstery.

English chairs of the 18th century were more differentiated in form than the French. The French taste for stylistic uniformity, which lead from the highest circles in Paris and Versailles within most of France and became the favourite in several parts of the Continent, had no parallel in England. Prior to 1740, the most commonly used wood was walnut; thereafter, and for the rest of the century, it was mahogany. Walnut, though beautiful in hue, was soft and therefore less suited to wood carving than to rounded, curving forms. Outer surfaces, such as the back and seat frame, were usually veneered. During the walnut period, highly overstuffed armchairs, covered with leather or embroidered material, were also developed. The best upholstery of this period is precisely and firmly modelled and accentuated by braiding or tacks. When imports of mahogany became common, no specifically new chair designs appeared, but the character of the woodwork changed. Mahogany, having a firmer, closer grain, could be cut thinner, which meant that individual parts of the chair could be more slender in shape. Mahogany also lent itself better to carving than walnut. Carving was concentrated more on the arms and back than on the legs, which as a rule were straight and smooth with chamfered ( bevelled ) edges and molding. There was a wealth of variety in chairback designs, featuring elegant, pierced, vase - shaped splats or two upright posts connected by horizontal slats ( ladderback ).

Alongside the French Rococo chair and the best English chairs in walnut and mahogany, the stick - back chair was relatively unaffected by the stylistic changes of the day. Originally a medieval form, known, for example, from paintings by Pieter Bruegel the Elder and still found in mid - 20th century in the churches and inns of southern Europe, the stick - back chair ( in all of its variations ) consists basically of a solid, saddle - shaped seat into which the legs, back staves, and possibly the armrests are directly mortised. This typically peasant form underwent a renewal and a process of refinement in England and America during the 18th century. Under the name Windsor chair ( a term that seems to have been used for the first time in 1731 ) or Philadelphia chair, it became reknowned and was widely distributed throughout the world.

Late 18th to 20th century In the Neoclassical period, no basic changes took place in chair forms, but legs became straight and dimensions lighter. Backs in the shape of classical vases replaced the fanciful outlines of the Rococo period. Around 1800, freely executed imitations of Greek and Roman chairs of the klismos type, with curved legs and backrest, appeared. French chairs of the Empire period, executed in dark mahogany and embellished with ornate bronze mounts, created a ponderous effect.

In cheaper brands of inferior workmanship, bourgeois chairs of the 19th century carried on the traditions of the 17th and 18th centuries. The only real innovations were the bentwood ( wood that has been bent and shaped ) chairs in beech that became popular all over the world and were still made in the 20th century. Around 1900 the continental Art Nouveau and Jugendstil styles ( French and German styles characterized by organic foliate forms, sinuous lines, and non - geometric forms ), and the Arts and Crafts movement in England ( established by the English poet and decorator William Morris to reintroduce idealized standards of medieval craftsmanship ), gave rise to original chair designs by Eugne Gaillard in France, Henry van de Velde in Belgium, Josef Hoffman in Austria, Antonio Gaud in Spain, and Charles Rennie Mackintosh in Scotland. These new furniture styles did not exercise wide, let alone decisive, influence. The Art Nouveau chairs designed by the French architect Hector Guimard, for example, are collector ' s pieces, but his name is known to a broader public only because of his fanciful entrances to the Paris Mtro.

Modern After World War I, the Bauhaus school in Germany became a creative centre for revolutionary thinking, resulting, for example, in tubular steel chairs designed by the architects Marcel Breuer, Ludwig Mies van der Rohe, and others. During World War II, the aircraft industry accelerated the development of laminated wood and molded plastic furniture. The dominant chair forms of this period go back to designs by Alvar Aalto, Bruno Mathsson, and Charles and Ray Eames. Rapid technical developments, in conjunction with an ever - increasing interest in human - factors engineering, or ergonomics, hint that completely new chair forms will probably be evolved in the future.

The History Of The Development Of Digital Thermometer

The primogenial thermometer in 1593 by the Italian scientist Galileo Galilei ( 1564 - 1642 ) invented. His lead off thermometer is a glass tube of one borderline of the exposure and the other stub with a immense walnut, glass thought Digital thermometer. Occasion lavish upon the glass mental picture heating, and then the glass tube into the water. With the change in temperature, the water in the glass tube will procedure up and down temperature changes and big and low temperature can be firm according to the number of moving.

Thermometer the role of thermal expansion and contraction, so this thermometer, by the external atmospheric pressure and other environmental factors, so the measurement error. Later, Galileo ' s students and other scientists, on the basis of repeated improvements, such as glass tube upside down, the liquid on the tube, the glass tube closed and so on. The more prominent is the thermometer manufactured by the Frenchman Bu Liao in 1659, his glass bubble volume is reduced, and temperature material to mercury, such a thermometer with the thermometer of the prototype. After Dutch Fahrenheit in 1709 the use of alcohol, the use of mercury in 1714 as the measurement of material, creating a more accurate thermometer. He observed that the water temperature, salt water and ice mixed in when the boiling temperature of water and ice mixed temperature; after repeated experiments and approval of the final temperature when the solidification of a certain concentration of salt water to 0 F, the solidification of pure water The temperature is 32, the standard atmospheric pressure, water boiling temperature of 212 on behalf of the Fahrenheit temperature, which is the Fahrenheit thermometer.

Fahrenheit while the Frenchman column Muir ( 1683 ~ 1757 ) also design and manufacture of a thermometer. He believes that the coefficient of expansion of mercury is too small, not so temperature material. He devotes himself to study the advantages of alcohol as a temperature material. He repeated practice found to contain 1 / 5 of water, alcohol, between the freezing temperature and the boiling temperature of water, the expansion of its volume is increased from 1000 volume units to 1080 units of volume. He therefore between freezing and boiling is divided into 80 parts, as its own thermometer temperature degree, this is the column ' s thermometer.

Fahrenheit made and then after 30 years, the Swedish camera Seoul Hughes in 1742 to improve the Fahrenheit thermometer scale, the boiling point of water as 0 degrees, the freezing point of water at 100 degrees. Later, his colleagues Shilemoer, two temperature values upside down, it becomes now the percentage of temperature, that is the Celsius temperature in indoor - outdoor thermometer. The relationship between Fahrenheit and Celsius temperature = 9 / 5 32 = 5 / 9 ( - 32 ).

British and American countries the use of Fahrenheit, the German multi - column ' s temperature, world scientific community and industrial and agricultural production, and most of China, France and other countries is more, in degrees Celsius.

The History Of The Fedora Hat

Although the most likely mindfulness association of the Fedora hat is with gangsters from the 1920s, polished is a surprising history of this hat style. The Fedora hat has a loop down the top in the middle and is pushed in on the front on both sides, with the limits slightly stooped down to protect the faculty from sunshine. It was first off a hat worn be females. It was made popular in a play that starred the resolute Saran Bernhardt in 1889 where queen played the splendid role of Princess Fedora ' to fascinated - out houses on Broadway.

Women picked up the fashion trend and began emulating Ms. Bernhardt by tiring " Fedora " hats thereafter. This female fashion trend lasted about 10 - 15 oldness and then suddenly men began captivating up the originate by exhausting this hat. This is not unlike the early transition of Marlboro cigarettes that were first marketed toward females, which failed miserably, and out of desperation were sold to men, without changing the tobacco blend, the package coloring, or any product details except for the marketing campaign direction.

The Fedora hat enjoyed this gender re - identification without a major manufacturer putting the marketing dollars and muscle behind it. For some unexplained reason this hat became very fashionable for a man to wear sometime around 1910 or so. On or around that time women stopped wearing them and moved on to more elaborate bonnets that became the dominant women ' s fashion of that time.

Maybe it was because of the simplicity of this hat style and the fact that you could roll it up to store it, without damaging it, that it left the world of women ' s fashion and moved on to become the dominate choice in men ' s hats for the 30 or so years following its first adoption by men around 1910.

One cannot watch any old gangster movie, especially the ones in black and white without see almost all the men wearing one. Fedoras are as much a part of the gangster attire of the prohibition times as is the " Tommy ' machine gun in a violin case. If you wanted to look like a tough guy, one who around which you should watch your step, the Fedora hat was the thing to wear. There are even very funny scenes in the black and white movies of those times, when all the men are wearing Fedora hats and are having a bar brawl, knocking each other here and there, hitting each other over the head with a chair, yet not one of them loses their Fedora hat in the process.

Hats for men, with the exception of baseball hats have completely gone out of fashion. But should a sudden fashion craze overtake men ' s fashion and put hats once again in the spotlight, one would hope it would be de rigueur once again to wear a sporty Fedora hat. Should this miracle occur, Humphrey Bogart, God rest his soul, would be very proud of you.

The History Of The Hairbrush

We may expect of hairbrushes as utilitarian tools for grooming but it hasnt always been that way. Once upon a time, comb, hairbrush and shine sets were scarce luxuries that were ofttimes given as gifts to new brides, or as romantic anniversary gifts from husbands to wives. Equable today, a popular baby gift is Babys Aboriginal Brush in healthy, downcast or gender - neutral offensive with silky soft bristles. And why not? Matched the Bible refers to hair as a womans indefectible glory. Its only to be expected that grooming tools for proper anxiety of hair would be important.

Hair brushes are pervasive. They occupy a moderately unrepeated place in our culture. How many of us have a mindfulness of sitting on a let fall at mothers feet tide she dragged a brush through our tangles? Who hasnt held a hairbrush to their lips and sung along with the radio? Theres something sensual, appealing and comforting about having your hair brushed. Having your hair brushed is one of the most deliciously decadent and sensuous treats in the world and yet, theres a sweet innocence to it.

The earliest hairbrushes, some historian theorize, were made of natural materials like porcupine quills which could be used to pick through hair and tug out knots. Animal hair brushes were originally used for painting some 2. 5 million years ago, and the theory is that those brushes were later adapted for use in hair grooming. Theres no note in history to name the person who first thought of drilling holes into a wooden paddle and inserting firm animal hairs into those holes, but whoever it was certainly can claim the title of genius. In the centuries since, the hairbrush has undergone some evolution, but the basic design remains the same a handle, a paddle ( also called a club or a block ), and bristles ( or teeth ).

These days, many of us simply pick up a hairbrush at the corner drug store or department store without paying much attention to quality, design and materials. This, say hair care professional, is one of the worst things that you can do for your hair. The brush that you use every day has more to do with how your hair looks and feels than the expensive shampoos and conditioners that people pay for without blinking.

According to those who work with hair every day, the best brush for most people is one made of genuine boar bristles. Boar bristle hairbrushes do more than detangle and style hair. The natural material picks up sebum your hairs natural oil and distributes it evenly from scalp to ends. It gently massages the scalp to stimulate healthy sebum production, and smoothes the shaft of the hair to make it shiny and manageable.

For coarser, thicker hair, nylon bristles may be more appropriate. A bit stiffer than boar bristle, the nylon bristles can detangle and work through thick waves without tugging or pulling. For curly, wavy or thick hair, a nylon and acrylic half - round brush is ideal for daily hairbrushing needs.

Why not get the best of both worlds? Boar and nylon combination brushes have the firmness needed to get through thick hair, and the natural qualities of boar hair bristles. While its easy to walk into any store and buy a cheap hairbrush, you really owe it to your hair to use the best hairbrush you can get. Fine construction pays off while a beech wood brush with 100 % boar bristles will cost a bit more than a molded plastic one from the corner store, it will last years and keep your hair healthy, shiny and soft.

Visit http: / / www. fuller - brush - products. com

The History Of The Legendary Workwear Brand Named Dickies Workwear

Many people you direct will have heard the head Dickies Workwear, but back in 1918 this was dependable a local pen name in the whereabouts of Bryan in Texas. It is in Bryan that C N Williamson and Col EE Dickie even now their, promptly to be worldwide phenomenon business in workwear. They began their careers in the vehicle and harness business, but then they saying an one's say in the market for workwear. Carhatt Workwear had under consideration been up and running for over 30 age at this point and was beginning to die down, so they saw a great opportunity to bring something new about. This is when they began their great journey into discovering Dickies Workwear, then starting their business being named the U. S. Overall Company. Please continue reading to learn more about how Dickies has become the household name it is to date.

Four years after starting their business being named the U. S. Overall Company, the business changed it ' s name to Williamson - Dickie Manufacturing Company. This change in name was partially due to the fact that C Don Williamson joined his father and cousin in buying the whole of the company so they all owned one third of the business. Then there is the argument the name change was because Williamson - Dickie wanted to manufacture more workwear products rather than just overalls. Whatever the reason for the name change, it is all irrelevant as the business was soon to be called Dickies Workwear and became an international known manufacturer of workwear.

At this point, having gained a reputation for producing hard wearing garments, the American Government asked them to manufacture millions of uniforms for the armed services. Once this request was successfully completed, Williamson - Dickie developed customers further away in the European market and Middle East. The late 1950 ' s was when Dickies workwear was introduced to the workers of the Middle Eastern oil fields. Then in 1989, Dickies was provided to the British workers performing as an affordable yet durable workwear.

More recent developments in the brand from the 1990 ' s are when Dickies Workwear became somewhat of a fashion item. Celebrities such as Justin Timberlake, Avril Lavigne, Westlife and Snoop Dogg are just a handful of the celebrities that have been spotted wearing the clothing brand. It is believed the rugged styling and performance of Dickies Workwear is the reason behind so many youngsters wanting to wear the product as a fashion trend. Not only has it been shown to be wore by celebrities but also films have been shown using Dickies.

To sum up, the great history behind Dickies Workwear is somewhat amazing. They have grown from being a small town business to international manufacturers of workwear. How much more successful can you be?

The History of the Old Bailey - Background & Origins

http://ihrprojects.files.wordpress.com/2012/04/shutterstock_671245151.jpg

The Old Bailey is one of the most famous institutions commensurate to jurisprudence and crime in the UK and perhaps beyond. The building and courtrooms of the Old Bailey have been the stage for many of the country ' s highest structure criminal cases down the centuries and since the agnomen, as right as the building with its domed roof and gold statue of Lady Impartiality, have become symbolic of the judicial system and the courts of London and the UK.

>

Background

The pet name the - Old Bailey ' is used to remit to what is more accurately the Central Criminal Expert for England and Wales ( Scotland & Northern Ireland have their own ) and the buildings that make up the peacemaker mingled. The courts are to be found on the edge of the City of London on the corner of the Old Bailey road and Newgate Street.

In its role as a crown court, the Old Bailey has and does witness the most significant and serious criminal cases from around the capital as well as a few, when their specific circumstances warrant it, from elsewhere across England and Wales. As a result it has the highest profile of any criminal court in the country and so it is referred to extensively in popular British culture. The iconic Lady Justice statue atop the domed roof symbolises British justice whilst the functional entrance to the courts in south of Old Bailey has become very familiar to us all from countless news reports down the years.

Early History

The common - use name for the courts is actually taken from the name of the street on which it is found. The name of the street in turn refers to the fact that it was historically the site of the western segment of the old wall, or bailey, surrounding the city of London. The wall originally dated from the Roman occupation and a small portion of it can still be seen in the basement of the Old Bailey court buildings.

The site immediately to the north of the Old Bailey was the location of a gate within these walls which could also trace its origins back to the Roman era and which sat across the old Silchester to Londinium Roman road. The imposing gate buildings, which became known as Newgate, were appropriated to house criminals entering or leaving the city and in 1188 the first incarnation of the infamous Newgate prison was constructed at the gate on the orders of Henry II.

The Old Bailey courthouses evolved as an addition to the Newgate prison whilst the prison complex was developed and improved in the 16th century using funding from the late Sir Richard Whittington ( the inspiration behind Dick Whittington ). The first record of the actual law court dates back to 1585 although that, along with the rest of the prison complex were destroyed in the 1666 Great Fire of London and whilst the prison was rebuilt in 1672, the courts were not reestablished for a further two years.

Part 2 of this article covers the expansion of the courts and the development of the modern Old Bailey.

Stuart Mitchell 2012

If you want to find out more legal services in the capital then you can visit Solicitors London.

The History Of The Paint Brush

Paint brush manufacture dates back to prehistoric times, when wall and pothole drawings suggest some contour of brush was used. Brushes have been discovered in Egypt, which were made from split palm leaves, and it is an accepted gospel that writing brushes were used by the ancient Greek and Romans.

In modern brush making, the the book of evaluating hairs and making handles is carried out by mechanism, the actual building up of hair and placing in the ferrules is done by hand, the bristle of hair being arranged in carefully graduated lengths. Nowadays old brush settings approximating as resin pitch and pulp have been superseded by vulcanised rubber and synthetic cements.

The part of the brush which does the brushing is called the bristle, over for many centuries bristle was the chief material used to make brushes. Bristle comes from hogs, pigs and boars, and from no other sources. It has many finest properties which make it example for benefit in brushes, but it is right estimable to manufacture. For this basis many other materials are used, collectively being known as brush filling materials.

For centuries the West yielded sufficient quantities of bristle for our needs, but by year 1800, imported White Russian bristle was considered to be more desirable, and was available until the Russian Revolution. We then turned to China for ours needs, the bulk of which is black and is considered to be more inferior. Domesticated pigs no longer yield sufficient quantities, so we are now dependent on countries like Russia, China, India, Poland and Australia.

Bristle is naturally curved, and so before it can be used it must be straightened. The property of the bristle varies according to the country of origin. The length of bristle is usually in the region of 2 to 7 inches. The colours are normally white, yellow, grey or black. Grey or black Russian bristle tends to be rather coarse. China black is stiff but fine, and Siberian white or lily has the best quality but is rare. One feature common to all types is the fine tapering along it ' s length, and split ends known as the flag. This is most useful, because it enables a more even spread of paint, and more paint can be loaded onto the brush.

The search for bristle substitutes led to the experimental use of artificial silk fibres such as rayon and nylon. These synthetic filaments are hard wearing, but because they are smooth and non - absorbent they carry far less paint. It is a known fact that a brush requires a period of ' breaking in ' before it achieves perfect condition. During this period the flag end is worn away by abrasion, and is replaced by a fine tapering point. This is not possible with nylon. The use of horse hair, which comes from the mane or tail is normally used to make jamb dusters and cheap retail brushes.

Mexican fibre is extracted from the leaves of a plant. In it ' s natural state it is off - white and has a pasted appearance. There are about 20 different plants that are used for this purpose, and all must be cleaned, combed and cut before use. Brushes made from these fibres are generally not suitable for good work.

Brushes which are classed as ' soft hair ' are used in furnishing industry. Many are often from small furry animals, such as the tails of the squirrel, badger, polecat and pony. Another soft hair comes from inside the ears of cattle, known as ox hair. Red and black sable is obtained from Siberian sable and other members of the weasel family. These are mainly used for sign - writing, graining, guilding and art work.

The History Of The Pet Rock

Origin of Attention

In 1975, Gary Dahl, an advertising executive, launched the sale of a fad that would make him a millionaire. This extended profit is comparable more impressive when one takes into tally the short time in which the rocks were taken, only six months, and further the low cost of the product, about four dollars. Dahls ingenious marketing involved commonplace gray pebbles, bought from a construction supplier, which were then implicated as living pets. The thought was inspired by the bother, mess, and ducats that pets allied as community or dogs or fish required. And thus, Dahl began the production and sale of the Pet Rock, which did not obligation to be walked, wouldnt cost hundreds in war-horse bills, and would not poop on the concrete.

Specifics of Production

Dahl named the company " Rock Bottom Productions, " and obsessed the rocks for $3. 95 a piece. The pebbles were imported from Rosarito Beach in Baja California, Mexico, and then packaged in a petite cardboard box, designed equaling a pet carrier. Dahl further created a " Pet Rock Training Handbook, " containing directions on how to properly onus for one ' s pet, including how to den train ones pet: " Place it on some old newspapers. The rock will never know what the paper is for and will require no further instruction. The instruction manual included such commands as sit, stay, roll over, play dead, and come.

Why would anyone ever buy a pet rock?

" If there were more fads, there would probably be a lot fewer psychiatrists. " Ben Hakuta, creator of Wacky Wall Walkers

Indeed, pet rocks give us more pleasure than we know. These pets support this argument through their very existence, showing us that it is not an actual item that brings joy to the child in the human mind, but merely the idea of the item. The pet sits in a niche in the mind, created by the power of the owners imaginations. It is in the actual exercise of the mind that such pleasure is found. It is quite a valid point that finding such productive and effective uses of recreation time can be more preventative and beneficial to the health of our minds that even the most advanced psychological treatments.

People who purchased these unusual " pets " often gave them names, talked to them, petted them, and taught them to perform simple " tricks ".

Pet rocks still live on

Like most fads, it never totally died out. There are memorial pages, spin - offs, and one can still purchase such a pet, though new manufacturers have given their rocks new features and looks. For instance, not many plain gray pebbles are sold any more. One can buy rocks that are inscribed, painted, and decorated in many a manner, lending the rock much more personality than afforded Dahls creation. One can purchase a rock with an agenda, or one can buy a rock that is individually painted in memory of any dearly loved pet, or one can still purchase that rock that is completely void of previous perception, and let its idea grow in the mind.

Virtual Pets

Virtual Pets follow the same formula as Dahls product. Operating more in the mind of the owner than anywhere else, Virtual pets can be an electronic toy, a computer program, or even a video game. However, though perhaps securing more time from an owner, virtual pets do not leave as much room for imagination as the pet rock.

The History Of The Suit

http://2bdancing.files.wordpress.com/2011/05/zoot-suit2.jpg

Suits can be classified in a departure of ways, which contain formal, semi formal, obscure, lounge suits, long-haired casual, business casual, and active clothes, but do you know where suits originally came from?

A man dressed in a three piece suit and trilby hat. The man ' s suit of garments is a set of dress, which are crafted from the corresponding material. The chitchat suit derives from the French trust, hint following, being the trousers and waist coat follow the jacket ' s textile and color. Qualified have been diversified styles of suit, the most common of which is the lounge suit, which originated in England for exhausting in the country.

The other types of suit still worn today are firstly the binge suit, part of black tie, which arose as a lounging alternative to dress coats in much the same way as the day lounge suit. Secondly, rarely worn today, is the morning suit. We will discuss the day time lounge suit, as opposed to specifically evening variations like black tie, which is part of the informal dress code. A business suit is a lounge suit suitable for wearing when conducting business.

The variations in design, cut, and cloth, such as two and three piece, or single and double breasted, determine the social and work suitability of the garment. Often times, the man ' s suit is worn, as is traditional, with a collared shirt and necktie. Until around the 1960s, as with all men ' s clothes, a hat would have been also worn when the wearer was outdoors. Suits also come with different numbers of pieces such as a two piece suit that has a jacket and the trousers, where a three piece adds a waist coat, then further pieces might include a matching flat cap.

Originally, as with most clothes, a tailor crafted the suit from his client ' s selected cloth, a process known as bespoke. The suit was custom made to the measurements, taste, and style of the man. Since the Industrial Revolution, most suits are mass produced, and as such are sold as ready to wear garments, though alteration by a tailor prior to wearing is common.

Currently, suits are sold in roughly three ways, which include bespoke, made to measure, and finally ready to wear. Bespoke suit is a garment that has been custom made from scratch entirely for the customer, giving the best fit and free choice of fabric. Made to measure suit is pre - made pattern is modified to fit the customer, and a limited selection of options and fabrics is available. Finally, the ready to wear suit is the least expensive and hence most common.

The current styles were founded in the revolution during the early seventeenth century that sharply changed the elaborately embroidered and jeweled formal clothing into the simpler clothing of the Regency period, which gradually evolved to the stark formality of the Victorian era. It was in the search for more comfort that the loosening of rules gave rise in the late nineteenth century to the modern lounge suit.

The History Of The Tie Rack

Adornments for the manlike snog aboriginal appeared in Pharonic Egypt, and succeeding in China underneath King Shih Huan Ti, c. 210 BCE. The Mikado, terrified of what awaited him in the dissolution, tailor-made to yield his horde with him. His advisors counseled castigate this strategy, recommending instead the creation of a terra cotta scores to be buried with him. The King consented, to the relief of his defend, and a scaled down horde of some 7, 500 soldiers was crafted in exquisite detail including the ornament of each with neckwear of precious silk, rendered in clay and enamels. No bill survives concerning the

tie rack system used by the Chinese Quartermaster to store these heirloom neckwear accessories for his multitude, but you can be unmistakable that it was not rejected to chance. Then, precise more than now, silken neckwear was a solace item, and its proper storage was a trouble to be solved. As for the lone Chinese infantryman, presumably he had but a single piece of neckwear to perplexity about, and it was worn about his kiss, the first-hand necktie rack as long as he had a head atop it.

Throughout the following centuries, a colorful piece of textile could regularly be fashion worn about the canoodle of an boon fighting man. Whether a side of Trajans Legions, a Croat tight-fisted, or a meed of the Sun Kings Cravate Royale, the addition of a snog framework in the regiments colors served as a silent dare to the unused or bemused to chortle aloud at the colorful effeminate trappings. Also, the only way to remove this crest of the fighting unit was to aboriginal remove the wearers head a bare secure tie rack indeed!

It was not until George Bryan " Beau " Brummell, the early 18th century fashion - setter, strolled through the desirable gardens and parlors of London in his deep - blue, well - cut frock coat and buff pantaloons with high leather boots ( polished, it is said, with champagne ) that neckwear came into its modern form. Unlike the Chinese infantryman, or the Legionnaire, a single necktie was no longer adequate. Beau, it was said, would change his lightly starched, brilliant white cravat thrice daily. Whether this arose from soup spotting or brow - dabbing or staining from the tears of a disappointed Lady, it is unknown, but let it not be said that Beau Brummell made his rounds in a soiled cravat. The tie storage system used by the Original Dandy is unknown, but presumably it was portable and accommodated sufficient neckwear to at least get him through the day. Back in his rooms, Beau was served by a reliable butler who oversaw the toils of his valet as he tended to the care of his entire wardrobe. Again, the tie rack system used by Beaus butler is unknown

Neckwear evolved from the bright white cloud of Beau Brummell to a palate of infinite richness and variety. Ties in the style de jour were to be manufactured in the Plantation fashion of the 19th century, the Black String Tie favored by the Western gentry and riverboat set, up through the apogee of boisterous originality found in the Art Deco rage of the early 20th century. An outlier in respect to grim predictability, perhaps, can be found in the Regis Philbin Look of the 1980s of exactly matching necktie to shirt.

While neckwear has evolved in terms of color, pattern and even material ( for example hemp ties, organic, of course, can be had for those resistant to the pull of convention ) the width of the necktie has appeared to have settled in at the 3 to 5 inch range and the length between 50 and 60 inches. Five inch wide ties have not been seen since the Piccadilly Circus days of shoe - swallowing bell - bottoms and Disco Cages. The re - emergence of these laughers is doubtful. There was also a brief period when the very narrow tie, 2 inches or less and often blunted off, was popularized by Frank and the boys of the original Rat Pack. It has been almost 50 years since the fashion world was so constrained. The return of this minimalist approach is awaiting a resurgence of the ultra - skinny lapel.

This standardization of the necktie into its modern dimensions has given rise to various efforts to design a suitable necktie rack. Most of these efforts are, frankly, disappointing. Your grandfathers small cabinet with individual drawers for each tie is lovely, no doubt, but suitable only for those with a very small tie collection or for those with a very large closet and a thick billfold. Plenty of idle time to search through the array of drawers would also be required of the customer who fancies this approach.

The battery powered tie storage systems bring electric power to a problem that doesnt need electric power. The installation, maintenance and battery monitoring required to keep the system functioning seem to be more than is required for the task at hand. It is a necktie collection we are aiming to store here, not a bottling plant conveyer system we need to shoehorn into our closet! A functional necktie rack rather than a technological wonder was the need of the hour.

At the other end of the technology spectrum we find the little - wooden - pegs - stuck - in - a - wooden - board approach. This tie storage system is about as advanced as a deer antler, but less attractive and more frustrating. The problem with these tie racks is they dont work. Pull one tie off the rack and its neighbor falls to the floor. Do you want to move the necktie rack to your shirt and suit to select a tie? If you try it with this Closet tie rack ( that is those racks that arent screwed to the wall, a particularly annoying sub - type ) every necktie you own may fall to the floor. It is a fine system as long as you dont want to actually access one of your ties. It is good as not having a tie rack at all!

What else is available for a person who wisely resists yet another battery powered contrivance and has a daily need to select one tie without re - hanging his entire collection? One choice is the technological equivalent of the Golden Mean, or the Middle Path, if you will. It comes in the form of The Original Necktie Butler. This necktie rack holds up to 30 ties without slippage, without wrinkling, without batteries, without installation. If you want to take your tie collection to the natural light of a window so you can make the subtle call for just the right necktie for a particular suit / shirt combination, then you simply lift the Butler off your closet rod and carry it to the window. Not a single tie will be lost en route. This necktie rack takes up a scant 2 inches of closet space a bit more than a shirt, but less than a sports coat. It is assembled in the USA of wood, chrome and 30 individual matte black triangles, spaced so they will not congregate at one end and bunch up your necktie collection. A quick jiggle and your collection will level itself no batteries required! A form - follows - function solution to the necktie storage problem that has bedeviled humanity for centuries. Bring an end to all your tie rack woes with the uncomplicated, functional and smart Original Necktie Butler.

The History Of The Varsity Jacket

Varsity jackets are worn by people who are classified as top performers in a particular sport. Many large school and college students that earn varsity letterman jackets are rewarded because of their soaring levels of performance and contributions to their varsity party. The letterman jacket gets its handle from the letter or knowledge on the estranged breast. They are nearly always the initials of the great school or college that the jacket comes from. The history of the varsity letterman jacket began in 1865 at Harvard. The baseball side at this prestigious school embroidered an old English style H to their plain gray flannel shirts. The squad captains only allowed those players that participated in the most important games of the season to maintain draining the H on their jersey. If they did not participate in the game they had to return their jersey at the end of the season. By 1930 the letters had begun appearing on wool jackets with leather sleeves and the still popular tradition of varsity letterman jackets begun.

You can find customized varsity jackets on almost every high school campus across the nation. These jackets are usually a heavy winter - style jacket. There are a number of things that people get customized on their jackets. You will find different styles but most include the school name, school colors, the year of the pupil ' s graduation, the school mascot, and the letters from the sports they have earned. Often times you will see varsity letterman jackets covered in multiple letters from multiple sports. Custom varsity jackets allow students to express a sense of style while showing pride for both their school and for their athletic accomplishments. Wool varsity jackets have become increasingly popular among students. Wool is a very warm textile and many students love wool varsity jackets for that exact reason; it keeps them nice and warm.

You can expect varsity letterman jackets in a number of sports. When most people think of varsity jackets they think of baseball, football, softball and basketball. While these are the most common sports that give out custom varsity jackets, you can also receive jackets for other sports such as golf, cross country, soccer, tennis and basically any sport that has a varsity level team. Any athlete that receives one of these jackets will feel privileged and honored to express their accomplishments in such a stylish way. Custom varsity jackets distinguish who the top players in a particular sport are and allow those players to show their entire school and anyone who sees the jacket just how worthy they are to be wearing it. Often times the males and females with these custom varsity jackets displaying numerous athletic awards, tend to excel socially and academically as well.

The History of UK Number Plates

Whether you own a personalised number plate commenced or youre considering making your introductory number plate purchase, this article contains all the relevant information about the vehicle registration youre curious in, including its issue date and place of origin.

Since the petrol gadget began to proceed from the trouble appliance in the mid 1890s the honor of the motor car has been explosive.

By the early 1900s crackerjack was contemporaneous a reputed 5000 cars on the road.

With this rapid rise in car occupancy came an equally rapid rise in car accidents and car crime and it nowadays became apparent that the predomination would have to devise a receipt of identifying vehicles and their owners.

The British vehicle registrations system began in 1903 with the passing of the

Motor Car Act though it didnt considerably come into compulsion until 1 / 1 / 1904.

The Act stated that each Local Council was to set up its own Registration and Licensing Authority and that all vehicles within their catchment area would have to be registered with it at a cost of 20 shillings each. As the number of cars on the road high to widen it was becoming clear that transport in general needed its own Control Department consequently in 1919 the Legation of Transport was created to deal with motoring legislation. The Roads Act of 1920 was subsequently passed which, and, required all vehicles to be registered with their regional Registration and Licensing Authority but further required car manufacturers, vehicle repair shops and car dealers to promote for a General Licence which was the big wheel to the Trade Plates of today. Hackney carriages were further required to exposition a separate plate stating how many people the vehicle was legally allowed to bring.

Registrations from 1903 to 1932

The front system of dateless registration numbers were issued from 1903 and ran until 1932 using the series A1 to YY 9999. The single letter or team of erudition at the commencement of the registration, proclaimed as the Tag, indicated the local authority to which the vehicle was registered, ( A= London, B = Lancashire, C = Yorkshire ). In England and Wales the tags were initially allocated in preference to riffraff size of given areas, whilst Scotland and Ireland had sequences using the erudition S and I respectively, which were allocated in alphabetical procession ( IA = Antrim, IB = Armagh, etc ). When a licensing authority reached 9999 it was allocated also tag but crackerjack was no decoration to these subsequent allocations, they were given out on a primeval come aboriginal served basis.

Registrations from 1932 to 1963

By 1932, registrations in the numero uno Dateless system of number plates were spring to trot out therefore a new system had to be introduced. This consisted of three knowledge followed by, up to three numbers, taken from the series AAA 1 to YYY 999. In this system the regional tags were the second and feeler education in the set of three. The single letter tags were now dropped as prefixing them would have created duplicates of previous two - letter tags. The scholarship I and Z were not used on main land Briton as they were reserved for serviceability in Irish registrations. The current Northern Irish system is coincident to this dateless system but uses 4 numbers instead of 3. Q registration was only used for imports at this point.

By the 1950s, the available number plates within this second dateless registration system had, besides, existent to dash out therefrom a reversed sequence was introduced, ( 1 AAA to 999 YYY ). The surpassingly - evolvement repute of the car can be gauged by the truth that this reverse sequence began to run out within ten years of introduction, so by the beginning of the 1960s, a further, short term, system had to be introduced in some of the more densely populated parts of the country. This took the form of a four number sequence with the one and two letter regional tags on the end ( 1A to 9999 YY ), in effect, a reversal of the very first dateless system.

Registrations from 1963 to 1982

The Suffix system of registration was introduced in 1963 in an attempt to create a national system that would alleviate the recurring problem of number plate sequences running out. The previous, - three letters followed by up to three numbers - system was kept, with a single letter added at the end, which changed every year. In this system, numbers were drawn from the range AAA 1A to YYY 999A for the first year, then AAA 1B to YYY 999B for the second year, and so on. Some regions didnt take up the suffix letter immediately, preferring to stick to their old system until it ran out, but in 1965 the suffix letter became compulsory. This new system had two advantages over earlier ones. Firstly; yielding many more available registrations than previous systems because the identifying sequence of letters and numbers could be reused every year and secondly it was a handy way for vehicle purchasers to know the age of the vehicle at a glance.

By now, though, the system was beginning to struggle with millions of documents passing through the Registration and Licensing Authority offices within local Councils so in 1965 the Government decided that the new suffix number plate system should be administered centrally. It was decided that the Driver and Vehicle Licensing Centre - or DVLC - would be set up in Swansea and be supported by 81 Local Vehicle Licensing Offices dotted around the county.

For the first two years of the suffix registration system the year letter changed on the 1st January, but car retailers began to notice that motorists, towards the end of each year, were waiting for the new letter to be issued before buying so that their car would stay looking newer for longer. In an attempt to flatten out sales, the industry lobbied the government to get the month of new registration releases changed from January to August. This was done in 1967 which meant that in that year there were two letter changes: E on the 1st January and F on the 1st August.

From the 1st January 1973 a new legislation came into effect which stated all vehicles were required to have reflective number plates - black on white at the front and black on yellow at the back. These new plates were introduced so that unlit vehicles could be seen more easily at night. The regulations also made law the uniform size, shape and characters of registration plates.

Registrations from 1983 to 2001

The Suffix system of registration didnt use I, O, Q, U or Z as year letters which meant that by 1982 it had reached Y and so had run its course. From 1983 onwards the sequence was reversed so that the year letter - starting at A - preceded the numbers and then the letters of the registration. This new system of vehicle registration was known as Prefix and the available range was from A21 AAA to Y999 YYY. As with Suffix registration numbers, the Prefix system didnt use

I, O, Q, U or Z as year letters.

The changes in 1983 brought the letter Q more widely into use for vehicles of indeterminate age, such as kit cars, rebuilt write offs, or in cases of imported vehicles with insufficient documentation. The Q registration was also used in the late 1980s and through the 1990s due to car crime. Many recovered, stolen vehicles had been given false identities and in cases where it was not possible to determine a vehicles true identity, a Q registration would be issued.

In 1984 a new computer system was installed at the DVLC, providing much more efficient communication between Swansea and the newly renamed Local Department of Transport Offices formally the Local Vehicle Licensing Offices - which had, by this time, been reduced from 81 offices to 53. Then in 1988, it was recommended that all the executive functions of government should be carried out by executive agencies in the interests of efficiency. Subsequently, DVLC became an agency and was re - named DVLA ( Driver and Vehicle Licensing Agency ).

Since 1997 there have been just 40 Local Department of Transport Offices in operation.

DVLA Registration Sales

By the time the Prefix Style Registration System was launched in 83, the government had become aware of the resale value of after market vanity number plates and so decided to withhold the numbers 1 to 20 from all the registration sequences ( A1 AAA to A20 YYY ) for the government ' s proposed DVLA Select Registration Sales Scheme, known today as DVLA Personalised Registrations. They continued to do this until August 1991 ( J reg ) when it was decided to withhold a few more sequences.

They continued to withhold these numbers from J to Y registration ( 2001 ) when the range of Prefix Style number plates became exhausted.

DVLA Personalised Registrations first started selling cherished number plates in around 1990 but it was almost a short lived thing.

Towards the mid - 1990s there was some discussion about introducing a unified European registration system which would incorporate a countrys code of origin. This idea was dropped due to the lack of countries willing to participate.

DVLA Personalised Registrations was then free to continue adding the withheld number plate ranges to its sales pages as they became available each year.

Registrations from 2001 to Present Day

By the late 1990s, the range of Prefix Style registrations was coming to an end.

A process accelerated in 1999 by a move from annual to biannual registration issue dates ( 1st March and 1st September ) as car dealers, once again, began to struggle with the ever increasing amount of orders every August.

In September 2001 the Current Style registration system was introduced.

Vehicle registration numbers now have a format composing of 2 letters followed by 2 numbers and ending with 3 letters ( AA51 AAA ). The first 2 letters are, once again, a regional tag just as they were on the very first Dateless Plates

The 2 numbers following the regional tag letters relate to the date of issue, the first number signifying the month and the second number signifying the year.

The remaining 3 letters are randomised in order to make each registration unique. This system of registration also saw the introduction of the letter Z to British mainland number plates for the first time but only for use in the last 3 random letters.

Its estimated that there are over 30 million vehicles on the road in the UK today so the Current Style system needed to cope with this and any future growth in road vehicles.

The DVLA can issue up to 7, 312, 896 registrations ( give or take ) on each new issue date and the sequence will run until 2049 / 50 before a rethink becomes necessary.

When it does come to an end, my guess would be that the DVLA will simply reverse the Current Style system.

If it were down to me, Id name that system of registration " The Recurrent Style "

The Regfinder History of Number Plates Pages

To read a more comprehensive history about UK vehicle registrations including tables and editorials of;

Global Number Plate Systems

Guernsey Number Plates

Jersey Number Plates

Isle of Man Number Plates

Military Number Plates

Trade Number Plates

Irish Number Plates & ID Tags

Dateless Number Plate ID Tags

Current Style Number Plate ID Tags

Diplomatic Registrations

Embassy Codes

Suffix Plates Issue Dates

Prefix Plates Issue Dates

Current Style Plates Issue Dates

Withheld Prefix Number Plate Sequences

Number Plate Crime

Number Plate Size, Font & Colour Schemes

Total DVLA Number Plate Sales

Visit The History of Number Plates in the help pages of Regfinder. net

The History Of Velocette Motorcycles

A family of motorcyclists built the Velocette and this showed through the design and excellence of the manufacturing. That family was the Goodmans, and three generations were to bridle the Foyer Infant firm over the age.

Between 1913 and 1925, they produced hot property, huge grade 250cc two - renown, which gained an outstanding reputation, and were entered in competitions, congenerous as the Isle of Man TT. The single - drainpipe machines had many unskilled outlook, analogous as a throttle controlled oil pump, which set them apart from other manufacturers. The workshop gradually developed this appliance from the ' A ' series and variants ( A, AC2 - coil ignition, two - speed gearbox, AC3 - three speed gearbox, etc. ), then the ' H ' series, the model U and variants.

In the early 1920s, Veloce realised that in adjustment to wax as a company, it needed a new engine of unusual specification and developed an overhead camshaft ( OHC ) 350 cc appliance, confessed as the ' K ' series, which was introduced in 1925. Meeting a instance of teething troubles with this new design, Veloce entered into nimble events resembling as the Isle of Man TT and Brooklands races, and the reliability and saccharine running qualities of their new tool led to a string of speedball successes.

By 1930, they had made their matronymic in the TT with Junior wins in 1926, 1928 and 1929 using their OHC engine. They had also reached the end of development for their first two - stroke engine and so had a new one to offer.

It was the 249cc GTP, and it moved away from the overhung crankshaft of its predecessors to the more normal one.

The other machines all had 348cc OHC engines, with their slim, light lines and bevel and shaft drive on the right. The magneto went to the rear where it was chain driven, lubrication was dry sump and the dynamo, when fitted went in front of the crankcase and was driven by a flat belt.

There were three models, with the KSS the one for sporting roadwork. For the racer, there was the Mark I KTT, which was the first production - racing machine to be sold to the public and was based firmly on the 1928 works model.

The third machine was the KTP, which had coil ignition, the points came on the end of the camshaft, the dynamo was in the magneto position and it had the twin exhaust ports.

The company introduced four - speed gearboxes in 1933 for the KSS and KTS models. However, there was a big gap between the small two - stroke and the sports camshaft models.

To fill the gap, Velocette experimented with a side valve 350cc which lacked power and then came up with another classic, the 248cc MOV. This had an OHV engine, a high gear driven camshaft, enclosed valves and nearly square dimensions. It was obvious that it would rev and provide lively performance and no one was disappointed for early road models were good for 60mph and later tuned models for 100mph.

To fill the gap, Velocette experimented with a side valve 350cc which lacked power and then came up with another classic, the 248cc MOV. This had an OHV engine, a high gear driven camshaft, enclosed valves and nearly square dimensions. It was obvious that it would rev and provide lively performance and no one was disappointed for early road models were good for 60mph and later tuned models for 100mph.

The road range was listed for 1940, but before production could really get under way, war broke out and the company switched to general contracts. These were the production Velocettes, but others were built as experiments, one offs and for their own racing. With the easy interchange of many parts or assemblies, it was often no problem to arrange and the practice spread to private owners.

After World War 2, the company sought to capture what it saw as a developing need for personal transport and created the LE model with the help of Phil Irving of Vincent fame. It was a 192 cc watercooled flat twin with side - valves, a pressed steel frame and telescopic forks and swingarm. It was sophisticated and expensive. Unfortunately it proved less successful than the firm had anticipated and although it became Veloce ' s best selling model ever, the massive tooling costs for this all - new machine were barely recouped.

The late 1960s were the last years of production for Velocette motorcycles, production for the Velocette Viper and Vogue ending in 1968, Special, Scrambler and Endurance in 1969, and MSS Venom and Velocette Thruxton in 1970.

Veloce Ltd closed in February 1971.

The History of Whipped Cream

The communique of whipping cream is strayed in night. The case is easy enough to have been discovered by miracle many times in many places. One likely plot is where someone in a biting climate was making butter, but being in a revive, whipped the cream reasonably than churning it. A common folk tale tells of a quickly horse ride with a half filled container of cream.

The first well known reference to it was when the French chef, Vatel created a variation with sugar to serve at a reception to honor King Louis the XIV in 1661. The addition of sugar is taken for granted today, but many other flavors have been added over the years, vanilla being the most common. Other popular flavorings include brandies or liqueurs and orange.

In the 1930 ' s, British scientists started developing aeration systems for use in the food industry. They soon developed a working system using pressurized N2O ( Nitrous Oxide ). N2O immerses fully into dairy products such as cream, causing instant whipped cream when the pressure is released. Hand held units suitable for home use were developed as well as larger commercial systems.

After World War II, American companies began manufacturing whipped cream dispensers. Many never developed quality systems and some companies discontinued production. The introduction of disposable, one use cans in the 50 ' s caused the closing of most of those that were left.

The waste from disposable cans has always been considered undesirable, even in the wasteful time period it was developed. The nature of the system always left some cream in the can when the N2O had been used up. The waste of the can itself was hardly an issue at that time. The convenience was considered to far outweigh the disadvantage of waste.

In today ' s ecologically aware society, many of us are no longer willing to contribute to the waste of disposable cans. There are many quality alternatives available. Making whipped cream at home with a whipped cream dispenser is fun, ecologically safer, and less expensive than disposable pressurized cans.